Ford Escort Manual

Air cleaner assembly - removal and refitting
Carburettor fuel system / Air cleaner assembly - removal and refitting


Removal
1 Disconnect the battery negative terminal.

2 Disconnect the crankcase ventilation hoses which are accessible from above, from the air cleaner body (see illustration).

2.2 Disconnecting the crankcase ventilation hose at the air cleaner body
2.2 Disconnecting the crankcase ventilation hose at the air cleaner body

3 Disconnect the cold air inlet hose from the end of the air cleaner spout where applicable (see illustration).

2.3 Cold air inlet hose removal from air cleaner spout
2.3 Cold air inlet hose removal from air cleaner spout

4 Where fitted, on CVH engines, pull out the crankcase emission valve from the underside of the air cleaner body.

5 Undo the retaining screws or bolts on the air cleaner lid and lift the unit off the carburettor.

6 On 1.1 and 1.3 litre HCS engines, unclip the fuel trap from the side of the air cleaner casing.

7 According to model, disconnect the vacuum hose and the remaining crankcase ventilation hose(s) as applicable, then remove the air cleaner from the engine.

Refitting
8 Refitting is a reversal of removal.


© 2018 www.fordescortcar.ru. All Rights Reserved.