Ford Escort Manual

Body exterior fittings - removal and refitting
Bodywork and fittings / Body exterior fittings - removal and refitting


Spoilers and wheel arch deflectors
Removal
1 The spoilers and wheel arch deflectors fitted to XR3, XR3i, Cabriolet and RS Turbo models are secured by screws, rivets and clips, or a combination of all three.

2 The screw and rivet fasteners are concealed under blanking plugs which are prised out to gain access to the screw or rivet as applicable (see illustrations). These can then be drilled out or unscrewed and the spoiler or wheel arch deflector withdrawn.

25.2a Front spoiler attachments - XR3 models
25.2a Front spoiler attachments - XR3 models

A Retaining screws B Retaining pegs

25.2b Front wheel arch extension attachments - RS Turbo models
25.2b Front wheel arch extension attachments - RS Turbo models

A and B Rivets
C Screws
D Screw cap

Refitting 3 Refitting is a reversal of removal.

Body adhesive emblems and mouldings
Removal
4 The radiator grille emblem, the front wing motif, the tailgate emblems and the body side mouldings are all of the self-adhesive type.

5 To remove these devices, it is recommended that a length of nylon cord is used to separate them from their mounting surfaces (see illustration).

25.5 Removing tailgate adhesive badge
25.5 Removing tailgate adhesive badge

Refitting 6 New emblems have adhesive already applied and a protective backing. Before sticking them into position, clean off all the old adhesive from the mounting surface of the vehicle.


© 2018 www.fordescortcar.ru. All Rights Reserved.