Ford Escort Manual

Auxiliary air device - removal and refitting
Bosch K-Jetronic and KE-Jetronic mechanical fuel injection systems / Auxiliary air device - removal and refitting


K-Jetronic system Removal
1 Disconnect the battery earth lead.

2 Disconnect the wiring multi-plug and the two air hoses from the device which is located beneath the cold start valve (see illustration).

10.2 K-Jetronic system auxiliary air device connections
10.2 K-Jetronic system auxiliary air device connections

A Throttle housing hose B Cold start valve hose
C Wiring multi-plug

3 Undo the two Torx type retaining bolts using a Torx key or socket bit and lift the unit away (see illustration).

10.3 K-Jetronic system auxiliary air device retaining bolt locations
10.3 K-Jetronic system auxiliary air device retaining bolt locations

Refitting 4 Refitting is a reversal of removal.

KE-Jetronic system
Removal
5 Apply the handbrake, jack up the front of the car and support it on axle stands (see УJacking and Vehicle SupportФ).

6 Disconnect the battery negative lead.

7 Disconnect the auxiliary air device wiring multi-plug and the two air hoses.

8 Undo the two Torx type retaining bolts using a Torx key or socket bit and remove the unit from under the inlet manifold (see illustration).

10.8 KE-Jetronic system auxiliary air device retaining bolts
10.8 KE-Jetronic system auxiliary air device retaining bolts

Refitting 9 Refitting is a reversal of removal.


© 2018 www.fordescortcar.ru. All Rights Reserved.